Current transformers
Instrument transformers and protection transformers (also referred to as protective and relay transformers.) The requirements to these two categories of transformers are completely different and often incompatible.
According to international standards, instrument transformers must be accurate within a range of 1% or 5% to 120% of the rated current. The transformer must reach saturation at a given multiple of the rated current (normally 5 or 10 times I ), so the connected appliance is protected at great overload currents. Instrument transformers are mostly used in the power station sector and by industries to measure, monitor and control electrical outputs. They are manufactured in accuracy classes of 0.1, 0.2S, 0.2, 0.5S, 0.5, 1 and 3.
Quite differently, protection transformers must maintain their rather less accurate transformation ratios at many times the rated current (10, 15, 20 or 30 times I ). Protection transformers for relay purposes are used in connection with protective relays for overcurrent and differential protection. For these transformers, the measuring accuracy is limited at normal current; however, the measuring accuracy must be maintained up to several times the rated current. ransformers for overcurrent protection are produced in accuracy classes of 5P and 10P, while transformers for differential protection are produced in class X (BS 3938 & IS 2907).
Approx. Price: Rs 250 / PieceGet Latest Price Product Details:
| Power | 11kV |
| Transformer Type | Auto Transformer |
| Primary Current | 15 A |
| Feature | Heat Resistant |
| Secondary Current | None |
| Frequency | 50 Hz |
VARNIESH TAPE INSULATION
INSULATION CLASS - E
LOW VOLTAGE CURRENT TRNAFORMER
Additional Information:
Approx. Price: Rs 1,000 / PieceGet Latest Price Product Details:
| Minimum Order Quantity | 10 Piece |
| Power | 3kV |
| Transformer Type | Instrument Transformer |
| Accuracy Class | 0.5 |
| Cooling Type | Air Cooled |
| Voltage | 400-440 V |
| Phase | Three Phase |
| Frequency | 50 Hz |
METERING CT'S
We are dealing in mumbai,maharashtra and all over India.
Approx. Price: Rs 1,000 / PieceGet Latest Price Product Details:
| Power | 22kV |
| Accuracy Class | 0.2 |
| Rated Current | 5%-120% |
| Rated Current Accuracy | 1%-120% |
| Burden | 25% - 100%. |
We are offering 0.2s Class Current Transformer to our clients.
as per customer requirment we can make it.,
Approx. Price: Rs 220 / PieceGet Latest Price Product Details:
| Rated Power (VA) | 15VA 20VA 30VA |
| Rated Voltage | 660 |
| Core Type | Wound CT, Bar CT, Ring Core Type CT |
| CT Ratio | upto 10000 |
| Accuracy Class | 0.5 |
| Frequency | 50Hz |
We offer
Current Transformer for Protection against over current as per the requirement of the Specified Application. We can manufacture it in Resin cast or Tape winding, depending upon the requirement.
Approx. Price: Rs 80 / PieceGet Latest Price Product Details:
| Transformer Type | Current Transformer |
| Core Type | Ring Core Type CT |
| Accuracy Class | 0.2 |
| Rated Power (VA) | 11 /33/ 66 KV |
| Working Frequency | AC50-400Hz |
| Working Temprature | 10~75 degree C |
We are offering Mini Current Transformer to our clients.
We are dealing in mumbai,maharashtra and all over India.
Approx. Price: Rs 220 / PieceGet Latest Price Product Details:
| Secondary Voltage | 110 V |
| Accuracy Class | 0.2, 0.5 |
| Power | 5 VA |
| Frequency | 50-60 Hz |
| System Voltage | 720 V max |
We are Leading Manufacturer of
Low Voltage Encapsulated Current Transformer.
plastic module type transformer
Approx. Price: Rs 220 / PieceGet Latest Price Product Details:
| Minimum Order Quantity | 9 Piece |
| Power | 5 kVA |
| Core Type | Ring Core Type CT |
| CT Ratio | 100/5A |
| Phase | Single Phase |
| Rated Voltage | 660V |
| Material | Copper |
| Output Voltage | 660V AC |
| Mounting Type | POSSIBLE |
CLASS 1 VA 5
TAPE INSULATION - CODE 101
CLAMP & TERMINAL ALSO POSSIBLE
Additional Information:
Approx. Price: Rs 450 / PieceGet Latest Price Product Details:
| Accuracy Class | 0.2, 0.5, 1 or 3 |
| Core Type | Wound CT, Bar CT |
| CT Ratio | 50/5 to 5000/5 |
| Rated Burden | 1.25 to 30 VA |
| Primary Current | 50 to 3000A |
| Secondary Current | 5, 1, 5/rt3, 1/rt3A |
| Mounting | Threaded inserts for floor mounting. |
We are one of the leading manufacturers of premier Resin Cast CT that are admired for their functionality, accurate measurements and durability. These are dry type transformers produced in compliance with international quality standards. In these, the active part is embedded in quartz and epoxy resin is loaded using vacuum molding technique, which provides insulation between primary, secondary and earth. The resin is hardened by polymerization after molding.
Specification:
- Accuracy Class :For Metering : 0.5 to 5 A
- For Protection : 5P, 10P accuracy limit factor 5,10,15,20
- For PS Class : Knee point voltage (VK), secondary resistance and magnetizing current is required.
Approx. Price: Rs 350 / PieceGet Latest Price Product Details:
| Accuracy Class | 10, 0.2, 0.5 |
| Phase | Three Phase |
| Core Type | Bar CT, Wound CT |
| Rated Voltage | 660 |
| CT Ratio | Up to 10000 |
| Rated Power (VA) | 1.25VA TO 60VA |
| Frequency | 50-70 Hz |
The Rectangular Current Transformer is provided in tape insulated construction in rectangular design. It is extremely helpful in accelerating output and accuracy with an increased ratios. The rectangular CT''s is selected on the basis of its mechanical strength and durability. It is highly efficient, requires less maintenance and can withstand impulse voltage.
Approx. Price: Rs 185 / PieceGet Latest Price Product Details:
| Accuracy Class | 0.5, 1 or 3 |
| Core Type | Bar CT |
| Rated Voltage | 660v |
| CT Ratio | 50 to 250 |
| Rated Power (VA) | 1/3 |
| Primary current | Up to 5000 Amps |
| Rated Short Time Cuurent | 65 kA for 1 sec with 125 kA Peak |
| ISF | Less than 5 |
| High Voltage Power Frequency Dry Test | 2.7 Kv for 1 sec |
| Secondary Current | 0.1 A To 5A |
| Sample Tested at ERDA | 300/5 |
| Burden | 10 VA |
| Accuracy | Class 1.0 |
| Test Specification | As per IEC 60044:1:2003 |
| SIEMENS Type | AETK2 |
| Frequency | 50 Hz |
| Rated Insulation Level | 0.66/3 Kv |
We areLeading Manufacturer of
ABS Molded Tape CT (Acrylonitrile Butadiene Styrene) :
ABS use has grown over the last 50 years as more and more molders and OEMs take advantage of the it's processing and property versatility. ABS Applications run from Automotive Interiors and Exteriors, Boat Hulls and appliances to, Low tension electrical/electronic components and industrial equipment.
In general, ABS has high impact strength and rigidity, stands up well to chemicals and weather and it can easily be processed with good abs-molded surfaces.
Please refer the attached PDF for Physical, Mechanical, Thermal, Electrical properties of ABS FR grade.
Specification
- Test results After short time current test: With in half the limit of accuracy as specified in standerd
- Over Voltage inter turn Test: With stood
- P1 and P2 Markings: P1 embossed
- S1 and S2 Markings: Embossed
- Clamps: Available
- Terminal: Brass Tin Terminal
- Esthetics: Glossy Finish and Consistent in all pcs.
- Casting Material: ABS FR grade casing
- Remarks: Additional Protection Towards HV as the ABS FR grade material casing have 1.5 mm thickness all over
Approx. Price: Rs 650 / PieceGet Latest Price Product Details:
| Lv Voltages | 660v |
| Primary Current | 1 to 100A |
| Secondary Current | 5, 1, 5/rt3, 1/rt3A |
| Burden | 5 to 60 VA |
| Mounting | Threaded inserts for floor mounting. |
We manufacture WPL Current Transformer designed for large burdens and better accuracies (Metering, Protection and Special protection PS Class). Secondary terminal with threaded insert and primary with brass plated studs suitable for precision measuring test apparatus. Multiratio C.T. available in the portable wooden case to be used as laboratory standard.
Specification- For Metering : 0.1 to 1 A
- For Protection : 5P, 10P accuracy limit factor 5,10,15,20
- For PS Class : Knee point voltage (VK), secondary resistance and magnetizing current is required.
Approx. Price: Rs 440 / PieceGet Latest Price Product Details:
| Accuracy Class | 0.5 |
| Core Type | Wound CT |
| Rated Voltage | 660 |
| CT Ratio | 100 |
| Rated Power (VA) | 15 |
| Frequency | 50Hz |
| Primary Rating | 1A. to 75 A |
| Secondary Rating | 1 A. or 5A |
| Burden in VA | 1, 2.5, 3.75. 5, 7,5, 10, 15, 20. 25, 30, 40.50, 60 |
Along with our line of excellent quality electrical products and fabrication works, we offer our clients high quality
Wound Primary CT which we manufacture, supply and provide service. This wound primary CT is extensively used for various kinds of switchgears.
Specification:
- Class of Accuracy : Metering - 0.5, 1,0. 3.0, 5.0,
- Alf - protection - 5. 10, 15, 20.
- ISF - Metering - Less than 5.
- Special Rating can be offered.
- STC - As per customer's requirement.
- Primary Terminals - Stud Type / Bar type
Approx. Price: Rs 1,000 / PieceGet Latest Price Product Details:
| Accuracy Class | 0.2, 0.5, 1 or 3 |
| Rated Voltage | 0.72 kv(AC) |
| CT Ratio | 50/5 to 5000/5 |
| Rated Power (VA) | 3VA / 5VA / 7.5VA / 10VA |
| Frequency | 50-60Hz |
| Primary Rating | 1 A, 5A |
| Secondary Rating | 1 A, 5A |
| Burden in VA | 1. 2.5, 3.75. 5, 7.5, 3C, 40. 50,60. |
We are specialized in offering
Summation Current Transformer to our clients. Our offered transformer is manufactured using the finest quality raw material and the most recent technology in compliance with the international quality standards.
Specification:
- Class of Accuracy : Metering 0.5, 1.0,3.0,5.0
- Protection - 5P, 10P 15P, ALF - Protection - 5,10. 15,20.
- Primary Windings-As per rt4quirement, Generally 2, 3, or 4.
Approx. Price: Rs 220 / PieceGet Latest Price Product Details:
| Thickness | 0.3 mm-120 mm |
| Width | 1000 mm-3000 mm |
| Working power | 250 V |
| Ambient Temperature | 20 Degree C-50 Degree C |
| Rated Power AC | 16 VA |
We are offering Encapsulated Coil Current Transformer to our clients.
We are dealing in mumbai,maharashtra and all over India.
Approx. Price: Rs 220 / PieceGet Latest Price Product Details:
| Rated Burden (VA) | 1/2.5/5/10/15/30 |
| CT Ratio | 300/5-5A |
| Core Type | Ring Core Type |
| Accuracy Class | 1 or 3,10,20 |
| Working Temprature | 10-75 degree C |
| Working Frequency | AC50-400Hz |
We are Leading Manufacturers of
Low Tension Current Transformers.
We are dealing in mumbai,maharashtra and all over India.
Approx. Price: Rs 220 / PieceGet Latest Price Product Details:
| Frequency | 50 Hz |
| Ambient Temperature Range | 0 to 70 degree C |
| Voltage | 660 V. |
| Dielectric Withstand | 3 KV for 1 minute |
| Secondary Rating | 1 A. to 5 A |
| Round Primary Rating | 50 A to 10000 A |
| Burden in VA | 1, 2.5, 3.75, 5, 7.5, 10, 15, 20, 25, 30.40, 50, 60 |
| Rectangular Primary Rating | 50 A. to 10000 A |
Classes of insulation :as per customer's choice,IEC : we make c.t.s for different insulation classes, viz, a. F. B, F, H or C (corresponding to 105, 120. 130. 155, 180 or 220 degree class as IEC:216).
Types of terminals :- Flying leads with i.igs or pins.
- Brass inserts.
- Studs.
- Terminal Blocks of standard makes.
- As per customer's requirement.
Available Testing Facilities:All facilities for routine tests are available with us. Ii particular following equipments deserve mention:
- Microprocessor based Automatic C.T. Test set with Printer•R.B. Tech
- Micro ohmmeter - Digital
- Digital A meter - Delta Controls.
- Current Injection Test set - Multiple units
- High Voltage Test Sets - Upto 15 KV F) Standard C.T.s -1 class - Upto 2500 amps C.T.s. Burden - upto 30VA
Specification:
- Class of Accuracy : Metering - 0.5, 1.0,3.0, 5.0,
- Protection - 5P, 10P, 15P, Alf - Protection - 10, 15, 20.
- ISF - Metering . Less than 5.
- Special Rating can be offered.
- Multi core. Multi ratio C.T.s can be offered.
Approx. Price: Rs 220 / PieceGet Latest Price Product Details:
| Accuracy Class | 0.5, 1 or 3 |
| Core Type | Wound CT, Bar CT |
| Rated Voltage | 240 V |
| Rated Power (VA) | 5VA / 7.5VA |
| Ambient temperature | -5 Degree C to +40 Degree C |
| Frequency Hz | 50/60Hz |
We are Leading Manufacturer of
Metering Current Transformer.
We are dealing in mumbai,maharashtra and all over India.
Standard Tape Wound Type CT
Approx. Price: Rs 220 / PieceGet Latest Price Product Details:
| Accuracy Class | 0.5, 0.2 |
| Core Type | Bar CT |
| Rated Burden | 1.25 VA to 60 VA |
| Primary Current | 50A to 6000A |
| Secondary Current | 5 & 1, |
| For Protection CTS | 5P, 10P accuracy limit factor 5,10,15,20 |
| Mounting | M.S. clamp if required |
We manufacture
Standard Tape Wound Type CT (Ring & Rectangular Type) which are generally preferred because they are simple in construction, mechanically stronger, economical and easy to connect in existing switch-gear. They are used in Control Panels and Generator Panels (Metering, protection and special protection ps class) , they are available in round or rectangular window and suitable for a wide range of electrical test equipment.The Standard Tape Wound Type CT''S is manufactured using high quality material to offer high performance and quality. It is durable and is mainly used as a measuring device for metering and protection system in various industries. In addition, it is verified on various parameters to match the prevailing quality standards.
Specification:
- Accuracy Class :
- For Metering CTs : 0.5 to 5A
- For Protection CTs : 5P,10P accuracy limit factor 5,10,15,20
Approx. Price: Rs 250.00 / NumberGet Latest Price Product Details:
| Core Type | Ring Core Type CT |
| I Deal In | New Only |
| Operating Temperature Range | - 55 to + 75 degree C |
| Magnetic Interference | 300 mT |
| Operating frequency | 50/60 Hz |
We are offering Tape Insulated Current Transformer to our clients.
We are dealing in mumbai,maharashtra and all over India.
Approx. Price: Rs 60 / PieceGet Latest Price Product Details:
| Core Type | Ring Core Type CT |
| Phase | Single Phase |
| CT Ratio | 11000 |
| Material | Copper |
| Usage/Application | Metering |
| Accuracy Class | 0.2 |
| Enclosure | PLASTIC MODULE |
PERFECT ACCU -- 0.2 %SMALL SIZE WITH EPOXY RESINE
with flying lead wire
Additional Information:
- Item Code: 010
- Production Capacity: 2000 PER DAYS
- Delivery Time: READY
Approx. Price: Rs 1,000 / PieceGet Latest Price Product Details:
| Minimum Order Quantity | 1 Piece |
| Phase | Three Phase |
| Power | AS PER CUSTOMISE |
| Voltage Rating | ANY |
| Secondary Connection Type | ANY |
| Brand | NRG |
| Cooling Type | Dry Type |
| Capacity | 100 KVA |
| Winding Material | COPPER AND ALLU |
| Usage/Application | DISTRIBUTION \STEP UP AND DOWN |
SINGLE , TWO OR THREE PHASE TRANSFORMERAIR COOL AND DRY AIR TYPE TRANSFOREMR.
We are dealing in mumbai,maharashtra and all over India.
Additional Information:
- Production Capacity: 25 kva
Approx. Price: Rs 180 / PieceGet Latest Price Product Details:
| Part Number | 101 |
| Phase | Three Phase |
| Output Voltage | 220 V |
| Input Voltage | 415 V |
| Voltage Rating | 660 V |
| Frequency | 50/60Hz |
| Capacity | 660V |
We are Leading Manufacturers of
Step Down Current Transformer.
We are dealing in mumbai,maharashtra and all over India.
Approx. Price: Rs 1,000 / NumberGet Latest Price Product Details:
| Phase | Three |
| Finished | Coated |
| Material | MS |
| Test Specification | As per IEC 60044:1:2003 |
| SIEMENS Type | AETK2 |
| Frequency | 50 Hz |
| Rated Insulation Level | 0.66/3 Kv |
| Rated Short Time Cuurent | 65 kA for 1 sec with 125 kA Peak |
| ISF | Less than 5 |
| High Voltage Power Frequency Dry Test | 2.7 Kv for 1 sec |
| Rated Voltage | 660 V |
We are offering Epoxy Cast Low Voltage Current Transformer to our clients.
Specification:
- Test results After short time current test: With Stood
- Over Voltage inter turn Test: With stood
- P1 and P2 Markings: Sticker
- S1 and S2 Markings: Sticker
- Clamps: Available
- Terminal: Brass Tin Terminal
- Esthetics: Mat Finish
- Casting Material: Epoxy Resine
- Remarks: Insulation depends upon the thickness covering of Epoxy